|
| |
|
|
Piston for Racing Engine Škoda 110
Gerák, Jakub ; Maršálek, Ondřej (referee) ; Svída, David (advisor)
This Bachelor's thesis deals with the defect of the piston Metalex for a racing engine Škoda 110. The aim of my work is to find the reasons for the piston defect, to check the most stressed parts by strength calculation and suggest a possible structural design so that the piston withstands all stresses throughout the required lifespan.
|
|
| |
|
|
Three-cylinder Engines
Kočvara, Antonín ; Janoušek, Michal (referee) ; Drápal, Lubomír (advisor)
The main purpose of this thesis is to summarize the progress of four-stroke straight-three engines from the beginning of their production to these days in perspective of parameters and construction. Another goal is to show reasons for their exploitation. The reasons of exploitation are mostly compared to four-cylinder engine and some of them are supported by a calculation. There is also a chapter showing force acting in power train and its influences on straight-three engines. The closing part is dealing with possible ways in future development of straight-three engines.
|
|
| |
|
|
Concept of an In-line Spark-ignition Engine
Kočvara, Antonín ; Píštěk, Václav (referee) ; Drápal, Lubomír (advisor)
This thesis deals with comparison of straight four-cylinder petrol engine with a displacement of 1,5 litres and its three-cylinder alternative, which is based on a four-cylinder. The thesis starts with a research, where are examples of some currently manufactured engines. The research is followed by design of both engines, where the design of the crank mechanisms is made more in detail. After that, both crank mechanisms are subjected to dynamic analysis using FEM and MBS methods. The thesis ends with comparison of both engines in terms of crankshaft load, mass and dimensions.
|
|
|
Single cylinder engines enduro category
Svoboda, Tomáš ; Beran, Martin (referee) ; Vančura, Jan (advisor)
Bachelor thesis deals with the description of typical enduro motorcycle engine and describes its main parts. Next volume concern about chosen types of enduro motorcycles and its en-gines. Achievement of every single engine is shown in dynamometric diagrams. Maintenance schedule which is affected by given achievements is shown in tables. The engines of enduro motorcycles have been partly compared with motocross motorcycle engines
|
|
|
Workpiece conveyor
Vaníček, David ; Hermanský, Dominik (referee) ; Dokoupil, Vladimír (advisor)
This master‘s thesis is focused on the design of manipulator for crankshaft handling in flexible production lines. The first part describes the types of production lines and possible ways of inter-operative manipulation. With regard to the suitability of their use, a suitable variant is selected, which is then conceptually processed and verified by technical calculations. The final conclusion is the verification of the design in terms of safety. Part of the master‘s thesis is technical drawing documentation.
|
|
|
Spark ignition engine for small passenger car
Fáber, Filip ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this master’s thesis was to define force progression in crank-type mechanism from the set parameters of the cylindrical unit. Furthermore, the design of the possible balance of this crank-type mechanism with one balancing shaft was realized. The calculations of torsional vibration and stress analyses of the designed crank-type mechanism were realized too.
|
|
|
Crank mechanism with a high mechanical efficiency
Drápal, Lubomír ; Tůma, Jiří (referee) ; Páv,, Karel (referee) ; Píštěk, Václav (advisor)
This document describes the possibilities of increasing the mechanical efficiency of the crank train of an internal-combustion engine. For this purpose, a concept with a reduced number of main bearings is chosen and its contribution is verified experimentally. The proposed solution consists of an innovative crankshaft design of a four-cylinder spark-ignition engine with only three main journal bearings and laser-welded sheet metal crank webs. The new design is compared to the mass-produced one in terms of friction losses, vibrations and loading of engine parts by means of simulations of crank train dynamics using the Multi-Body System. The increase in vibration, accompanied by a reduction in friction losses, is compensated by a torsional vibration damper and its effect is experimentally verified. Experimental research of laser welds on the crankshaft in terms of fatigue life is also described. The overall potential is also summarised and further possible development of this innovative and patented design is outlined.
|
guest ::
